Tag Archives: Carburizing

Mechanical Properties versus Carburization Depth

In this article we will examine the relationship between ultimate tensile strength, fatigue strength, and elongation versus the depth of carburization. The data for this comparison was taken from several iterations discussed in previous articles and shown in Table 1. … Continue reading

Posted in News | Tagged , , , , , , , , , , , | 6 Comments

Strength and Fatigue Life versus Carbon Content at High Hardness (60 HRC)

The strength, fatigue and hardness data for several iterations with a high hardness level, around 60 HRC are shown in Table 1. The steels in these iterations are both plain carbon and low alloy grades with carbon contents ranging from … Continue reading

Posted in News | Tagged , , , , , , , , , | 1 Comment

Effect of Cooling Rate after Carburizing on the Fatigue Properties of Carburized Steels

In earlier posts, the fatigue properties of various carburized low alloy steels were examined.  Both case and core properties were evaluated.  Since carburized components are manufactured in various section sizes, it can be expected that cooling rates in the cores … Continue reading

Posted in News | Tagged , , , , , , , , , | Leave a comment