About Us
The Long Products Market Development Group (LPMDG), formed in 1997, provides a unique forum for long products steel producers. Through the support of Steel Market Development Institute, the LPMDG is growing the market for value-added steel bar and rod products. With member companies and task forces--Automotive/Heavy Equipment and Construction/ Infrastructure--the group is committed to developing innovative solutions to the challenges facing their clients and the steel industry.
SMDISteel
- RT @EnviroMetal: Steel products in America are made with an average minimum recycled content of 25 percent, meaning when you buy steel, you… 13 hours ago
- Happy #EarthDay! We're proud of steel’s contributions to helping achieve the triple bottom line of environmental, e… twitter.com/i/web/status/1… 17 hours ago
- As we move towards the vehicles of tomorrow, cost will continue to be a concern for automakers and consumers alike.… twitter.com/i/web/status/1… 2 days ago
- RT @BuildUsingSteel: .@DrPhillipsCtr in Orlando made a major step in the second phase of its construction with the installation of a 142-to… 3 days ago
Contact Us
Steel Market Development Institute
2000 Town Center Suite 320
Southfield, MI 48075
248.945.4777Blog Archive
Tags
- 1541 steel
- as-rolled
- austenite
- auto
- automotive
- axial fatigue bar performance
- bainite
- bainite/martensite
- bar
- bhn
- billets
- business
- carbon
- carbon steels
- carburized
- carburized steels
- Carburizing
- carburizing thermal cycle
- case/core composite
- Case hardening
- cooling rate
- ductility
- elongation
- energy
- fatigue
- fatigue-specimen
- fatigue approximation
- fatigue life
- fatigue performance
- fatigue scatter
- ferrite
- hardness
- high hardness
- HRC 40
- induction
- induction hardened steels
- industry
- long-life regime
- low alloy steels
- manganese
- market
- martensite
- mechanical properties
- microalloyed steel
- microstructure
- MPa
- pearlite
- reversals to failure
- SAE 1038
- SAE 1045
- SAE 1070 steel
- SAE 4130
- SAE 4140
- SAE 4320
- SAE 4620 steel
- SAE 8620
- SAE 8620 steel
- SAE 9254
- spring steels
- steel
- steel manufacturing
- Steels
- strain-controlled
- strain-controlled fatigue
- strain-life
- strain-life curve
- strain-life curves
- strain-life equation
- strain-life fatigue data
- strain amplitude
- strength
- sulfur
- technology
- tempered steel
- tensile
Links
Tag Archives: SAE 4620 steel
Comparison of Case Hardening by Carburizing Versus Surface Induction Hardening
In past postings, the case and core properties of case hardened steels have been discussed. These discussions have included the fatigue properties of both carburized and surface induction hardened steels. Carburizing is usually employed on carbon or low alloy steels … Continue reading
Posted in News
Tagged bainite, carburized steels, ferrite, hardness, martensite, mechanical properties, SAE 1070 steel, SAE 4620 steel
2 Comments
Effect of Continuous Casting Practice on the Case and Core Properties of Carburized Alloy Steels
In the previous posting, the strain-controlled fatigue properties of the high-hardness case and low-hardness core of carburized SAE 4620 steel were compared. It was shown that at short lives, the softer core exhibited better properties than the high-hardness case. At … Continue reading
Posted in News
Tagged bainite, billets, fatigue, martensite, SAE 4620 steel, strain-controlled fatigue
Leave a comment
